Wheel Loaders

926M Aggregate Handler Small Wheel Loader

Overview
Specifications
Equipment

Product Description

The Cat® 926M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Product Specifications

UnitsUSMetric

 

Engine
Maximum Rated Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
155 HP 116 kW
Maximum Rated Gross Power - ISO 14396
153 HP 114 kW
Maximum Rated Gross Power - ISO 14396 (DIN)
155 HP 116 kW
Rated Net Power - 1,800 rpm - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
148 HP 110 kW
Rated Net Power
148 HP 110 kW
Rated Net Power - 1,800 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
149 HP 111 kW
Maximum Rated Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800 r/min 1800 r/min
Maximum Rated Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
153 HP 114 kW
Engine Model
Cat® C7.1
Buckets
Bucket Capacities
3.0-5.0 m³ (3.9-6.5 yd³)
Weights
Operating Weight
29256 lb 13270 kg
Engine
Maximum Gross Power
155 HP 116 kW
Bore
4 in 105 mm
Stroke
5 in 135 mm
Displacement
427 in³ 7.01 l
Cab
ROPS
ISO 3471:2008
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank
5 gal (US) 19 l
Engine
Emissions
The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage IV off-highway emission standards.
Steering
Steering Cylinder, Double Acting - Stroke
17.2 in 438 mm
Loader Hydraulic System
Relief Pressure - Tilt Cylinder
4061 psi 28000 kPa
Tilt Cylinder, Double Acting - Stroke
21.9 in 555 mm
Engine
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
531 ft·lbf 721 N·m
Maximum Rated Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
146 HP 109 kW
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Loader Hydraulic System
Maximum Flow - Implement Pump
40 gal/min 150 l/min
Engine
Rated Net Power - 1,600 rpm - ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
142 HP 106 kW
Operating Specifications
Full Turn Tip Load
17350 lb 7870 kg
Loader Hydraulic System
Maximum Working Pressure - Implement Pump
3771 psi 26000 kPa
Transmission
Forward and Reverse - Range 2
8 mile/h 13 km/h
Service Refill Capacities
Engine Crankcase
5.3 gal (US) 20 l
Steering
Maximum Steering Torque - 0° (Straight Machine)
37155 ft·lbf 50375 N·m
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Engine
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
511 ft·lbf 694 N·m
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
9.6/10.5 seconds
Steering
Maximum Working Pressure - Steering Pump
3500 psi 24130 kPa
Loader Hydraulic System
Tilt Cylinder, Double Acting - Bore Diameter
5.1 in 130 mm
Power Train
Rear Axle - Traction Aid - Optional
Limited slip differential
Engine
Maximum Rated Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600 r/min 1600 r/min
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Transmission
Forward and Reverse - Range 3
17 mile/h 27 km/h
Loader Hydraulic System
Tilt Cylinder, Double Acting - Rod Diameter
2.8 in 70 mm
Power Train
Note (3)
*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 926M.
Service Refill Capacities
Hydraulic Tank
23.8 gal (US) 90 l
Power Train
Front Axle
Fixed
Loader Hydraulic System
Lift Cylinder, Double Acting - Rod Diameter
2.4 in 60 mm
Engine
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
144 HP 107 kW
Loader Hydraulic System
Lift Cylinder, Double Acting - Bore Diameter
4.3 in 110 mm
Steering
Maximum Flow - Steering Pump
34 gal/min 130 l/min
Engine
Rated Net Power - 1,600 rpm - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
141 HP 105 kW
Service Refill Capacities
Hydraulic System - Including Tank
42.3 gal (US) 160 l
Transmission
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Service Refill Capacities
Cooling System
7.9 gal (US) 30 l
Power Train
Rear Axle - Oscillation Angle by Tire Size - 17.5 R25
± 13.5 degrees
Engine
Maximum Rated Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
148 HP 110 kW
Steering
Steering Cylinder, Double Acting - Bore Diameter
2.8 in 70 mm
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s 2.4 s
Cab
FOPS
ISO 3449:2005 LEVEL II
Engine
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
151 HP 113 kW
Power Train
Note (2)
Offset rims available to meet European roading requirements.
Front Axle - Traction Aid*
Locking differential (standard)
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Steering
Steering Cylinder, Double Acting - Rod Diameter
1.6 in 40 mm
Loader Hydraulic System
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
40 gal/min 150 l/min
Steering
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Engine
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
531 ft·lbf 721 N·m
Power Train
Note (1)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Service Refill Capacities
Rear Axles
5.5 gal (US) 21 l
Transmission
Forward and Reverse - Range 4
25 mile/h 40 km/h
Steering
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s 2.8 s
Maximum Steering Torque - 40° (Full Turn)
27747 ft·lbf 37620 N·m
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4061 psi 28000 kPa
Service Refill Capacities
Fuel Tank
51.5 gal (US) 195 l
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
3771 psi 26000 kPa
Engine
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
511 ft·lbf 694 N·m
Power Train
Brakes - Service
Inboard wet disc
Cab
Note (1)
*Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
– The Blue Angel environmental label is an optional attachment for Europe only.
Loader Hydraulic System
Lift Cylinder, Double Acting - Stroke
28.7 in 728 mm
Service Refill Capacities
Front Axles
5.5 gal (US) 21 l
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
5.5/6.2 seconds
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Service Refill Capacities
Transmission - Gear Box
2.2 gal (US) 8.5 l
Cab
Declared Sound Levels
Declared Sound Levels
– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)*
– Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Power Train
Rear Axle
Oscillating
Loader Hydraulic System
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Power Train
Brakes - Parking
Spring applied hydraulically released
Transmission
Note
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Loader Hydraulic System
Note (3)
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Engine
Note (1)
*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
2.6/2.6 seconds
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
40 gal/min 150 l/min
Engine
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)
517 ft·lbf 702 N·m
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)
517 ft·lbf 702 N·m
Weights
Note
Aggregate Handler machine equipped with side guards and roading fenders.
Operating Specifications
Note
Aggregate Handler machine equipped with side guards and roading fenders.
Units:USMetric
Standard Equipment
POWER TRAIN
HYDRAULICS
ELECTRICAL
OPERATOR ENVIRONMENT
OTHER STANDARD EQUIPMENT
Optional Equipment
OPTIONAL EQUIPMENT

Used Equipment Rent Equipment

Compare Related Models (Select up to 2)

You may not select more than 2 models. Please remove a selection before adding another.

Compare Products

Casper
5300 W. Old Yellowstone Hwy
Casper, WY 82604
P 307.472.1000
F 307.261.4486

Cheyenne
7819 Hutchins Drive
Cheyenne, WY 82007
P 307.638.7900
F 307.633.2525

Gillette
5505 Mohan Road
Gillette, WY 82718
P 307.686.1500
F 307.686.3961

Rock Springs
1940 Elk Street
Rock Springs, WY 82901
P 307.362.6500
F 307.922.5549