Wheel Loaders

914 Compact Wheel Loader

Overview
Specifications
Equipment

Product Description

The Cat® 914 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Product Specifications

UnitsUSMetric

 

Engine
Maximum Gross Power
110 HP 82 kW
Maximum Net Torque - ISO 9249
327 ft·lbf 443 N·m
Engine Model
Cat C3.6
Maximum Gross Torque - ISO 14396
332 ft·lbf 450 N·m
Maximum Gross Power - ISO 14396 (DIN)
111 HP 82 kW
Rated Net Power - ISO 9249
98 HP 73 kW
Maximum Gross Power - Maximum Engine Speed
2350 r/min 2350 r/min
Maximum Net Torque - SAE J1349
329 ft·lbf 446 N·m
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Rated Net Power - SAE J1349
99 HP 74 kW
Maximum Gross Power - ISO 14396
110 HP 82 kW
Maximum Gross Power - SAE J1995
111 HP 83 kW
Bore
3.86 in 98 mm
Rated Net Power - ISO 9249 (DIN)
99 HP 73 kW
Rated Net Power - Rated Engine Speed
2200 r/min 2200 r/min
Stroke
4.72 in 120 mm
Displacement
220 in³ 3.6 l
Maximum Gross Torque - SAE J1995
335 ft·lbf 454 N·m
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Weights
Operating Weight
19103 lb 8668 kg
Buckets
Bucket Capacities
1.3-1.9 m3 (1.7-2.5 yd3)
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
Steering
Maximum Flow - Steering Pump
22 gal/min 82 l/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75 turns 3.75 turns
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
2.8 s 2.8 s
Maximum Working Pressure - Steering Pump
3263 psi 22500 kPa
Steering Articulation Angle - Each Direction
40 ° 40 °
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3046 psi 21000 kPa
Maximum Flow - Implement Pump
39 gal/min 148 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
24 gal/min 90 l/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3046 psi 21000 kPa
Hydraulic Cycle Time - Total Cycle Time
12.5 s 12.5 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2 s 5.2 s
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gal/min 90 l/min
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4 s 1.4 s
Relief Pressure - Tilt Cylinder
4931 psi 34000 kPa
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
32 gal/min 120 l/min
Maximum Working Pressure - Implement Pump
4061 psi 28000 kPa
Hydraulic Cycle Time - Rackback
2.2 s 2.2 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7 s 3.7 s
Service Refill Capacities
Cooling System
5.7 gal (US) 21.5 l
Fuel Tank
43.6 gal (US) 165 l
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential
2 gal (US) 7.5 l
Hydraulic System - Including Tank
25.9 gal (US) 98 l
Diesel Exhaust Fluid (DEF) Tank
4.8 gal (US) 18 l
Engine Crankcase
2.6 gal (US) 10 l
Hydraulic Tank
14.5 gal (US) 55 l
Transmission
0.8 gal (US) 3.2 l
Axles - Front Center Differential
2 gal (US) 7.5 l
Transmission
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3
25 mile/h 40 km/h
Forward and Reverse - Speed Range 1*
6.3 mile/h 10 km/h
Forward and Reverse - Speed Range 2*
12.5 mile/h 20 km/h
Tires
Other Choices Include
17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Standard Size
17.5 R25 L2 XTLA
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Cab
ROPS
ISO 3471:2008
FOPS
EN ISO 3449:2008 (ISO 3449:2005)
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Axles
Rear
Oscillating ±11 degrees; Locking differential (Standard)
Front
Fixed; Locking differential (standard)
Units:USMetric

Used Equipment Rent Equipment

Compare Related Models (Select up to 2)

You may not select more than 2 models. Please remove a selection before adding another.

Compare Products

Casper
5300 W. Old Yellowstone Hwy
Casper, WY 82604
P 307.472.1000
F 307.261.4486

Cheyenne
7819 Hutchins Drive
Cheyenne, WY 82007
P 307.638.7900
F 307.633.2525

Gillette
5505 Mohan Road
Gillette, WY 82718
P 307.686.1500
F 307.686.3961

Rock Springs
1940 Elk Street
Rock Springs, WY 82901
P 307.362.6500
F 307.922.5549